Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
1～12 item / All 12 items
Ultra-precision universal measurement microscope
- Measurement range: (X) 200mm x (Y) 100mm - Accuracy: ±(1+0.004L)μm The column can tilt left and right up to ±12.5°, and with the center support (maximum φ100 x 700L mm), it is also possible to measure threaded systems such as screws and taps.
Measure the minute curvature (radius) of concave and convex surfaces without contact!
Even the smallest curvature can be measured by increasing the magnification of the objective lens. Not only curvature but also the surface accuracy of the curved surface can be confirmed by the distortion of the optical chart image. By focusing the optical chart image on the curvature surface, performing zero adjustment, and then raising the position of the microscope to focus again on the optical chart image reflected on the curvature surface beyond the filament image, the amount of movement up to that point indicates the curvature and is displayed digitally.
For checking the tip angle of a small diameter drill!
It is an optical measurement device that allows simultaneous viewing of the drill tip and side from two directions to check whether the tip of the small diameter drill is correctly polished according to specifications, enabling visual inspection and angle measurement of the tip.
USB port specifications. Measurement range: X and Y axes 0 to 25mm, Z axis (depth) 0 to 6.5mm.
The "NTM-100F" is a USB port specification three-axis measuring microscope. The measurement range is 0 to 25mm for the X and Y axes, and 0 to 6.5mm for the Z axis (depth). The minimum reading value is 0.001mm for the X and Y axes (digital micrometer head) and 0.001mm for the Z axis (digital indicator). 【Specifications (excerpt)】 ■ Measurement Range ・X and Y axes: 0 to 25mm ・Z axis (depth): 0 to 6.5mm ※100X ■ Minimum Reading Value ・X and Y axes: 0.001mm (digital micrometer head) ・Z axis: 0.001mm (digital indicator) ■ Integrated Magnification: 100X (200X) *For more details, please refer to the external link page or feel free to contact us.
Shop measuring microscope with three models featuring total magnifications of 20X, 50X, and 100X.
The "NSM Series" is a shop measurement microscope with total magnifications of 20X, 50X, and 100X. We offer three models, including the "NSM-20" with a measurement range of 5.0mm. 【Specifications (NSM-20)】 ■ Total Magnification: 20X ■ Minimum Division: 5/100mm ■ Field of View: 9.0mm ■ Measurement Range: 5.0mm ■ Working Distance: 30mm ■ Size/Weight: φ64x200mm/600g *For more details, please refer to the external link page or feel free to contact us.
Since it is an optical non-contact method, measurements can be taken without the influence of deformation or dents on the workpiece!
The "TAH Series" is a microscope that allows for non-contact measurement of height, depth, and steps by aligning the "Focus Navi Mark" equipped in the microscope optical system with the Z-axis movement. By incorporating the Focus Navi Mark, reproducibility is significantly improved without relying on the operator. There are two types available: a trinocular type and a straight tube type, allowing for selection based on application. (The camera is of C-mount type) 【Features】 ■ Two types of objective lenses are available: infinite system f=180 type and f=200 type ■ Compact size ■ Can be mounted as a measurement scope on the device ■ Measurement stages, TV camera devices, and measurement software can be combined according to purpose *For more details, please download the PDF or contact us.
Leave everything from product purchase to calibration, repair, and retrofit to us.
It is a measuring microscope with a tiltable column. "Tilt angle" ±12°
Leave everything from product purchase to calibration, repair, and retrofit to us.
It is a versatile measuring microscope with a tiltable column. {Column tilt angle} ±15°
A measuring microscope that is very easy to operate! Minimum reading value of 0.01mm (digital specification) *Custom orders available.
The "XY Series" is a non-contact measuring microscope that measures between two points on a straight line. With the optional two-dimensional measurement software, you can save measurement values and images. You can choose between an aluminum or glass stage. In addition to the USB camera specification, there is also a standard tube (straight tube) specification available. Please choose one of the options. For other custom specifications, please consult us. 【Features】 ■ Easy operation ■ Measures between two points on a straight line ■ Measurement values and images can be saved with the two-dimensional measurement software *For more details, please download the PDF or feel free to contact us.
Integrated magnification 20X, with crosshairs. Measurement range X-axis 0 to 25mm micro measurement microscope.
The "NMM-25D" is a micro measurement microscope with a measurement range of 0 to 25mm on the X-axis. The minimum reading value is 0.001mm (digital micrometer head). The integrated magnification is 20X, with crosshairs. 【Specifications】 ■ Measurement range: X-axis 0 to 25mm ■ Minimum reading value: 0.001mm (digital micrometer head) ■ Integrated magnification: 20X with crosshairs ■ Size: 220mm (H) x 160mm (W) x 160mm (D) ■ Weight: 3.2kg *For more details, please refer to the external link page or feel free to contact us.
A measuring microscope that fits your purpose.
Whether the measurement sample is small or large. Whether the measurement content is simple or complex. Whether the user is a beginner or experienced. A measuring microscope that fits your measurements. That is the STM7 series.
